DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V160 for Jaguar Land Rover 2005-2021with Online Programming Function

STC SVCI DoIP Jaguar Land Rover Diagnostic Tool with PATHFINDER & JLR SDD V156 Software Support JLR from 2005 to 2019 with Online Programming Function


STC SVCI DoIP Product Overview

The SVCI DoIP Vehicle Communication Interface (VCI) is used by professional technicians as an aid in diagnosing and repairing vehicle electrical and electronic systems. The SVCI DoIP is designed to connect the vehicle to a host PC computer application which then functions though the SVCI DoIP for data transfer and Electronic Control Unit (ECU) reprogramming. Using the VCI Manager PC application software, The SVCI DoIP is capable of communicating over a USB cable.

The SVCI DoIP is a standard-based tool – supporting the SAE J2534 interface, and the ISO22900-2 Diagnostic-Protocol Data Unit (D-PDU) API. Fully support JLR diagnostic software SDD2 and Pathfinder, including diagnostic, ECU update, CCF configuration and all the functions of JLR.

[Sign in to view price]
DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V160 for Jagu
In stock
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V160 for Jaguar Land Rover 2005-2021with Online Programming Function

Price for VCI only   UK Made

SVCI DoIP jlr sdd pathfinder user guide manual (SVCI_DoIP_jlr_sdd_pathfinder_user_guide_manual.pdf, 363 Kb) [Download]

SVCI DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V156 for Jaguar Land Rover 2005-2019 with Online Programming Function (SVCI_DoIP_JLR_Diagnostic_Tool_with_PATHFINDER___JLR_SDD_V156_for_Jaguar_Land_Rover_2005-2019_with_On, 46 Kb) [Download]

How to use STC SVCI DoIP JLR Diagnostic Tool?

What is SVCI DoIP ?

SVCI DoIP is a special vehicle inspection tool for Jaguar Land rover models, it’s manufactured by BAOCHI.

It can work with SDD2 and Pathfinder software, which can achieve all the functions of these two software, it includes diagnostic, program ,immobilizer, change CCF configuration and special function etc. By the way, the original DoIP device can achieve the function, SVCI DoIP can also achieve.


How to install PATHFINDER software for STC SVCI DoIP:

How to install PATHFINDER software for STC SVCI DoIP:

Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.

Step 2: Access to software download center after purchase or get a harddisk or laptop from us ready to go

Step 3: Selection “Pathfinder” item and download pathfinder installer

Step 4: Double-click the file that you download and saved, and then install it.

Step 5: The pathfinder installer will automatically prompt you to download and update the software and files you need to install pathfinder(The automatic download and installation will takes up to 24 hours according to network download speed).

How to install JLR SDD software for STC SVCI DoIP :

How to install JLR SDD software for STC SVCI DoIP :

Step 1:Download software from http://diagnosticdelivery.jlrext.com/idscentral/

Step 2:Selection the “SDD_xxx_Full.exe” file, download and save it.

Step 3:Double-click the “SDD_xxx_Full.exe” file and install it.

Step 4:Selection SDD2-“QuickLoader” item from http://www.flyobd.com/shop/download-center download and install it.

Step 5:Double-click the “SDD2 “QuickLoader”.exe” file and install it.

2.2 Connected devices

How to connect STC SVCI DoIP to a Jaguar or Land Rover

How to connect STC SVCI DoIP to a Jaguar or Land Rover

After installing the software, you need to connect the equipment to the computer using a USB cable.

Then connect the OBD interface of the vehicle through SVCI DoIP device,

or connect the OBD interface of the vehicle and the equipment through the OBD extension cord.

Pathfinder and SDD, what’s the difference?

1.The JLR Pathfinder software

It is the only unit that will be compatible with the Pathfinder software and all JLR vehicles with the new vehicle architectures found in 2017 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2017 and newer vehicles, the Doip tool will also be capable of interfacing with 2014 through 2016 Multi-CAN architecture vehicles (see application list below).

2.The SDD software

(If you want to do programming, you must have an online account)

All 2014-2017 with no DOIP and earlier (2006 to 2014) land rover and Jaguar will still use the SDD software.

Why we use JLR Pathfinder instead of SDD?

The reason for SDD being retired and Pathfinder being introduced is more because of the contract with Ford expiring, as the SDD is based on the Ford IDS, so JLR has to pay Ford to keep using it.

The major change to the cars themselves is the infotainment system, the Next Generation Infotainment (NGI) is an ethernet-based system, vs the older MOST fibre-optic infotainment i.e. the IAM2.1

So yeah, you could not (easily or economically) retrofit the NGI system into an IAM2.1 car, for example. The components and network are totally different.

But… the NGI has been in some JLR vehicles since 2016, and is supported by SDD. There will be a cutoff where new models are no longer supported by SDD and only by Pathfinder. But Pathfinder also works on older vehicles too, back to 2014MY (approximately).

Pathfinder and SDD, which i should be used for JLR diagnosis or programming?

What JLR car models are covered by STC SVCI DoIP?

Look here: STC SVCI DoIP vehicles list:

Software NameVehicle NameModelYearsSupport’s functions
SDD2Land RoverL3162005~2016All
L3192005~2016All
L3202005~2016All
L3222005~2016All
L3592005~2016All
L4052005~2016All
L4942005~2016All
L5502005~2016All
L5382005~2016All
JaguarX1002005~2016All
X1502005~2016All
X1522005~2016All
X2022005~2016All
X2502005~2016All
X3502005~2016All
X3512005~2016All
X4002005~2016All
PathfinderLand RoverL4052017~latestAll
L4942017~latestAll
L4622017~latestAll
JaguarX1522017~latestAll
X7612017~latestAll
X7602017~latestAll
X2602017~latestAll
Note: All Jaguar and Land Rover models produced after 2016 can work with pathfinder software;

SVCI DoIP will constantly update sw for the latest JLR models.

How to use STC SVCI DoIP diagnostic tool?

If you want to use the SVCI DoIP device normally, you have to download and install three software:

Pathfinder, SDD2 and SDD2 “QuickLoader” software.

These three software can be installed in the same operating system together,

and when you use SDD2 software, you have to open it from the SDD2 “QuickLoader” software.

And when the software is installed, the device needs to be connected to the laptop and vehicle.

The Pathfinder software is primarily intended for Jaguar Land rover models manufactured in 2017 and beyond,

The SDD2 software is mainly aimed at Jaguar Land rover 2016 years models and before.

[Sign in to view price]
[Sign in to view price]
[Sign in to view price]
Activation for JLR Pathfinder latest version
SDD Pathfinder activation
[Sign in to view price]
[Sign in to view price]
Mercedes Benz Star DIAGNOSTIC, DAS XENTRY PassThru J2534 or XDOS Remote Program Setup Install Activation
​Mercedes Benz Star DIAGNOSTIC, DAS XENTRY PassThru J2534 Remote
[Sign in to view price]
NEW Virgin KVM RFA Modules Land Rover Jaguar Original
NEW Virgin KVM RFA Modules Land Rover Jaguar Original
[Sign in to view price]
[Sign in to view price]
[Sign in to view price]
[Sign in to view price]
[Sign in to view price]
Activation for JLR Pathfinder latest version
SDD Pathfinder activation
[Sign in to view price]
[Sign in to view price]
Mercedes Benz Star DIAGNOSTIC, DAS XENTRY PassThru J2534 or XDOS Remote Program Setup Install Activation
​Mercedes Benz Star DIAGNOSTIC, DAS XENTRY PassThru J2534 Remote
[Sign in to view price]
NEW Virgin KVM RFA Modules Land Rover Jaguar Original
NEW Virgin KVM RFA Modules Land Rover Jaguar Original
[Sign in to view price]
[Sign in to view price]