Activation for JLR Pathfinder of latest version

Activation for JLR Pathfinder latest version

[Sign in to view price]
Pathfinder activation

This product is electronically distributed.

Remote Activate SDD & Pathfinder Latest Version

You need to download team viewer

Install Latest Version of Teamviwer

Leave login info in notes at order payment time

We can remotely login and Activate Latest on your pc Pathfinder and keep you up to date with current Versions.

No Physical product is shipped here

We Supply the Activation of the software Remotely via Teamviewer login info you supply at order time

We dont offer money back on this software service

Why use the old software when you can be using the latest version.

Pathfinder supports vehicles up from 2017 Using Doip Hardware below and SDD Does all the Previous Vehicles

Land Rover:

Range Rover L405 (17MY)

Range Rover Sport L494 (17MY)

New Discovery L462 (17MY)

Jaguar:

F-TYPE X152 (18MY)

F-PACE X761 (18MY)

XE X760 (18MY)

XF X260 (18MY)

The software is Made to work Offline which means no net connection is needed and no online connection to Topix is required.

You dont need to pay for each time you use the software.


What is PATHFINDER?

PATHFINDER is the all new diagnostic system specifically designed and released for the introduction of the following vehicles.

Land Rover:
  1. Range Rover L405 (17MY)
  2. Range Rover Sport L494 (17MY)
  3. New Discovery L462 (17MY)
Jaguar:
  1. F-TYPE X152 (18MY)
  2. F-PACE X761 (18MY)
  3. XE X760 (18MY)
  4. XF X260 (18MY)

These vehicles have been designed to communicate with new high speed communication protocols. This allows faster software download, programming and communication, making it faster to use and saving valuable time.

These vehicles can ONLY communicate with the all new PATHFINDER diagnostic software using the new Diagnostics over Internet Protocol (DoIP) Vehicle Communication Interface (VCI) unit which conforms to the new communication protocol.

NOTE:

All Retailers must install PATHFINDER to all Jaguar Land Rover Approved Diagnostic Equipment.

Important information:

Symptom Driven Diagnostics (SDD) does not have the functionality to communicate with these 2017 model year vehicles.

PATHFINDER is the ONLY diagnostic tool to be used for the 2017 model year vehicles identified previously.


What do I need to use PATHFINDER?
Panasonic Toughbook / Toughpad or other Good Laptop

JLR Approved Diagnostic Equipment For PATHFINDER to operate at its very best, the laptop or tablet being used must be an approved version/level of hardware.

Note: For further information on approved hardware to support PATHFINDER, refer to: - Administration Bulletins JAB00046 / LAB00051

JLR SDD SOFTWARE VERSIONS

JLR SDD YEARS COVERED:
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
JLR SDD SOFTWARE VERSIONS:
  • Latest Version Win 7 32 Bit

JLR IDS SDD SOFTWARE FEATURES

DTC Code Retrieval:
  • Retrieve OE DTC with code Definition
  • Link DTC to service information
  • Customizable PID display
Data Logging:
  • Body
  • Chassis
  • Electrical
  • Powertrain
  • Pressure/Vacuum Tests
Bi-Directional tests:
  • Body
  • Chassis
  • Electrical
  • Powertain
Network Test:
  • CAN
  • J1850/ISO9141/SCP
Module Programming:
  • Programmable Module Installation (PMI) procedures
  • Module Reprogramming (Reflash)
  • Coding
  • Supplemental restraints initialization
  • Programmable Parameters ( ability to change in service settings ie, tire size, personality, customer convenience etc.)
Body Controls:
  • Anti-theft System Functions
  • Remote Keyless Entry
  • Restraints (supplemental restraints and seat belts)
Chassis Tools:
  • ABS Service Bleed
  • ABS/ Brake system functions
  • IVD Initialization Sequence
  • Ride Height Calibration ( for vehicles with pneumatic or hydraulic ride height controls)
  • Cruise Control System tests
  • Tire pressure monitor functions
  • Electronic Ride control
Electrical Tools:
  • Charging System Tests
  • Parking Aid Tests
  • Audio
Powertrain Tools:
  • EVAP Evaporative Emission Control System
  • Fuel System Test/Relative Injector Flow Test
  • Bi-directional control of fuel components
  • Bi-directional Ignition System control
  • Power Balance Test
  • Transmission bi-directional Tests
  • Engine Checks and OBD Tests (Drive Cycle, Mode 01, Mode 06 & Mode 09)
  • EGR Test
Digital Multimeter:
  • Basic DMM functions
  • Current measurements (50 Amps/500 Amps)
  • Pressure/Vacuum measurements
IDS Legacy Tools for Jaguars 1997 -2005:
  • NOT SUPPORTED
PROVEN OFFLINE STABLILTY DURING DIAGNOTICS & PROGRAMMING:
  • YES SUPPORTED

JLR SDD Vehicle Model Compability

Discovery Sport / L550 2015-present:
  • Yes
Range Rover Velar / L560 2018-present:
  • Yes
Range Rover Evoque / L538 2012-Present:
  • Yes
Discovery / L462 2017-Present:
  • Yes
Range Rover / L405 2013–Present:
  • Yes
Range Rover Sport / L494 2014-Present:
  • Yes
Range Rover Sport / L320 2005–2013:
  • Yes
Defender / L316 1983–2016:
  • No
Discovery 2 / L318 1998–2004:
  • No
Discovery 3 / L319 2005–2009:
  • Yes
Discovery 4 / L319 2010–2016:
  • Yes
Freelander / L314 1997–2006:
  • No
Freelander 2 / L359 2007–2015:
  • Yes
Range Rover / L322 2002-2012:
  • Yes
Range Rover / P38a:
  • No
Range Rover Classic:
  • No

Jaguar IDS Vehicle Model Compability

E-PACE / X540 2016–Present:
  • Yes
XK / X150 2006–2014:
  • Yes
F-PACE / X761 2016–Present:
  • 16MY vehicle lines with DOIP VCI support:
  • Yes
XK / X100 1996–2005:
  • No
  • Supported under IDS in V131 or V128
F-TYPE / X152 2014–Present:
  • 14-16MY vehicle lines with DOIP VCI support:
  • Yes
XJS / XJ27 1975–1996:
  • No
XF / X260 2007–Present:
  • 14-16MY vehicle lines with DOIP VCI support:
  • Yes
XJ V8 / X308 1997-2002:
  • No
XJ Sedan / XJ40 XJ81 1986-1994:
  • No
XE / X760 2015–Present:
  • Yes
XJ / X350 2003–2007:
  • After 2006 only with SDD & Below 2006 IDS
XJ / X351 2009–Present:
  • 16MY vehicle lines with DOIP VCI support:
  • Yes
XF / X250 2007-2015:
  • Yes
XJ / X300 1994-1997:
  • No
  • Supported under IDS in V131 or V128
X-TYPE / X400 2001–2009:
  • 2006 onwards Supported under SDD in V131 or V138
  • Yes 2006-2009 in SDD
S-TYPE / X200 2000-2008:
  • Yes 2006-2009 in SDD
What is PATHFINDER?

PATHFINDER is the all new diagnostic system specifically designed and released for the introduction of the following vehicles.

Land Rover:
  1. Range Rover L405 (17MY)
  2. Range Rover Sport L494 (17MY)
  3. New Discovery L462 (17MY)
Jaguar:
  1. F-TYPE X152 (18MY)
  2. F-PACE X761 (18MY)
  3. XE X760 (18MY)
  4. XF X260 (18MY)

These vehicles have been designed to communicate with new high speed communication protocols. This allows faster software download, programming and communication, making it faster to use and saving valuable time.

These vehicles can ONLY communicate with the all new PATHFINDER diagnostic software using the new Diagnostics over Internet Protocol (DoIP) Vehicle Communication Interface (VCI) unit which conforms to the new communication protocol.

NOTE:

All Retailers must install PATHFINDER to all Jaguar Land Rover Approved Diagnostic Equipment.

Important information:

Symptom Driven Diagnostics (SDD) does not have the functionality to communicate with these 2017 model year vehicles.

PATHFINDER is the ONLY diagnostic tool to be used for the 2017 model year vehicles identified previously.

What do I need to use PATHFINDER?

Panasonic Toughbook / Toughpad or other Good Laptop

JLR Approved Diagnostic Equipment For PATHFINDER to operate at its very best, the laptop or tablet being used must be an approved version/level of hardware.

Note: For further information on approved hardware to support PATHFINDER, refer to: - Administration Bulletins JAB00046 / LAB00051

installing PATHFINDER software

Note:
  1. The PATHFINDER software is designed to be installed to your existing JLR Approved Diagnostic Equipment. Please make sure you have the latest level of SDD software installed before beginning the PATHFINDER software installation.
  2. Make sure there are no external USB flash drives inserted into the machine.
  3. Due to software file size, the software download and installation process will take some time.

Downloading and Installing PATHFINDER

Downloading and Installing PATHFINDER

  1. Make sure that the approved hardware is connected to the internet.
  2. Open Internet Explorer
  3. Using the following URL, Download the PATHFINDER software:
    1. http://diagnosticdelivery.jlrext.com/pathfinder/jaguarlandrover_connect_updater.exe
  4. Select ‘Save’, select ‘Desktop’, select ‘Save’.
  5. The software file will now download.
  6. Select ‘Run’.
  7. A security warning window will appear, select ‘Run’.
  8. The Jaguar Land Rover Connect Setup Wizard will now begin.
  9. The ‘Welcome to the Jaguar Land Rover Connect Setup Wizard’ pop up will appear. Select ‘Next’.
  10. The 'Select Additional Tasks' pop up will appear. Do not select the ‘Create a desktop icon’. Select ‘Next’.
    1. Note: The installation progress will be shown on screen.
  11. After installation, the 'Completing the Jaguar Land Rover Connect Setup Wizard' will appear. Select ‘Finish’.
  12. The machine will now restart.
  13. The Internet Explorer will open with your homepage or the new JLR App Launcher screen will open.
    1. Note: The PATHFINDER icon will not work until the software download has completed.
  14. The PATHFINDER software will automatically download in the background.
    1. Note: To check the software download progress, select the ‘Hidden Icon’ arrow in the bottom right hand of the screen (Windows system tray). Right click the ‘Connect’ icon, select ‘Check for Updates’ and view the Jaguar Land Rover Application progress bar.
    2. Note: Due to software file size, the software download and installation process will take some time, please be patient.
    3. Note: Do not attempt to use PATHFINDER or SDD until the software download and installation has completed.
  15. The ‘Jaguar Land Rover Connect Updater’ pop up will appear, select ‘Install Now’.
    1. Note: If the ‘Please close JLRAppLauncher to continue the installation’ pop up appears, hover the cursor over the ‘JLR Application Launcher’ icon on the ‘Windows Task Bar’ at the bottom of the screen. Right click on the icon and select ‘Close Window’. Select ‘Continue’ on the ‘JLRAppLauncher message’ pop up.
  16. The ‘JLRAppLauncher message’ pop up will close, PATHFINDER is now installing, please be patient.
  17. Select the ‘Hidden Icon’ arrow in the bottom right hand of the screen (Windows system tray). Select the ‘Connect’ icon and view the ‘Jaguar Land Rover Application progress bar.
  18. When the progress bars display 100%, select ‘Close’.
  19. PATHFINDER is now installed.
Installing the Diagnostics over Internet Protocol (DoIP) Vehicle Communication Interface (VCI) unit

Installing the Diagnostics over Internet Protocol (DoIP) Vehicle Communication Interface (VCI) unit
Note:
  1. PATHFINDER requires a DoIP VCI unit to communicate with the 2017 model year Range Rover L405, Range Rover Sport L494 and New Discovery L462.
  2. The DoIP VCI must be the only VCI connected to the JLR Approved Diagnostic Equipment when using PATHFINDER. Future PATHFINDER communications will appear soon in the ‘Activity Stream’ section on TOPIx. Every retailer MUST have the DoIP VCI available in their workshop. The DoIP VCI is the only JLR approved VCI unit that can communicate with the 2017 model year vehicles identified earlier.
  3. Please be aware that the following instructions are only applicable for the first use of the VCI. Once the initial installation and settings have been completed, the DoIP VCI is plug and play with the PATHFINDER software.
  1. Insert the DoIP VCI USB cable into the DoIP VCI device and the JLR Approved Diagnostic Equipment.
    1. Note: The ‘USB Input Device’ pop up will appear, select ‘X’ and close the pop up.
  2. Select the ‘Windows’ key.
  3. Select ‘All Programs’.
  4. Select ‘Bosch’.
  5. Select ‘VCI Software (JLR)’.
  6. Select ‘VCI Manager (JLR)’.
  7. Select the VCI icon displayed on screen.
  8. Select ‘Connect to VCI’
  9. Select ‘VCI Update’.
  10. Select ‘Start Update’.
  11. The ‘VCI Manager Information’ pop up will appear, select ‘OK’ to continue.
    1. Note: Do not disconnect the DoIP VCI from the JLR Approved Diagnostic Equipment during the update process.
    2. Note: The DoIP VCI update process will take approximately 12 minutes to complete.
  12. The DoIP VCI will now automatically restart.
  13. Wait for the DoIP VCI to give an audible beep. Select ‘OK’ to continue.
  14. Select ‘X’ and close the ‘VCI Manager’.
  15. The DoIP VCI is ready for use Setting Preferences in PATHFINDER
Setting Preferences in PATHFINDER
  1. Select the PATHFINDER icon on the ‘JLR Application Launcher’.
  2. Select ‘Other User’ and enter your ‘User Identification’ and Password details.
  3. Select ‘Independent Operator’ or ‘Authorised Repairer’.
  4. Select ‘OK’ and log in.
  5. Read the content of the ‘Warning’ pop up and select ‘OK’.
  6. Select the three bar icon in the top right of the screen. Select the ‘Settings’ icon’.
  7. Select the ‘Communication Interface’ tab. Select ‘D-PDU’.
  8. The ‘Windows Security Alert – Windows Firewall’ pop up is displayed.
    1. Note: Do not select ‘Cancel’ when the ‘Windows Security Alert’ pop up is displayed.
  9. In the ‘Windows Security Alert – Windows Firewall’ pop up, select the check boxes for ‘Private Networks’ and ‘Public Networks’, then select ‘Allow Access’.
  10. The preferences have now been set in PATHFINDER.
    1. Note: Once the initial installation and settings have been completed, the DoIP VCI is plug and play with the PATHFINDER software.