Lock50 HW05 433 Mhz Transponder Emulator Hitag Pro With RKE PKE Keyless Functions 2010 to 2018

Lock50  HW05 433 Mhz Transponder Emulator Hitag Pro With RKE Keyless Functions

Note these are Aftermarket Keys  But Very High Quality like OEM spec

To Use Requires

• HW01 Lock50 TagPro
• Software Module SW09 to Write data to HW05 to HW12 Hitag Pro emulators with RF Functions
  
• Lock50 HW04 JLR HEX Doctor OBD Key Programmer

To use Lock50 Tagpro HW01 follow procedure below.

Open a Dump file for the MCU you have read 

Select the key position you wish to emulate  and press COPY

HW02  has no RKE or PKE and only supports Emergency Start

HW05 to HW12  Can Support RKE & PKE and supports Emergency Start

Ready to start car holding emulator under steering wheel or use the RKE Remote Keyless Functions with HW05 to HW12

The HW05 to HW12  can be programmed by using files from Dlash and Eeprom  for older KVM's and need the Dflash only for the newer type RFA after 2017 with Lock50 HW01 + SW09 on the Bench Programming  or use the HW04 Lock50 JLR OBD Key Programmer to Program via OBD.

Also using the Lock50 HW01 you can copy  unlocked Keys from other Change ID keys producers on to our Higher Quality emulators that are OEM HW07  to  HW10   or on to non OEM HW05 & HW06 keys.