Do you have a used KVM and wish to have it virginised so that it can be programmed with SDD or DoIP Again ?
Upload the P-Flash D-Flash and Eeprom Data and will send you back the files to program back the KVM to Virginize
Use a Programmer to Read the MCU Data
After you write back the files to the chip its possible to program the unit back in the car using SDD or Pathfinder.
As there are many different KVM part numbers and it is literally impossible to stock them.
If you have a SDD or Pathfinder Package with a KVM Programming tool then you can code the same KVM you took out back in to the vehicle after its been virginsed as if it came from the Factory or Dealer in new Blank Condition.